A bucket elevator is a type of vertical conveyor used to transport bulk materials (such as grain, coal, slag, sand, or cement) from one level to another. The elevator operates by utilizing a moving conveyor element with attached buckets that load material at the elevator’s return station and then carry it upward, where the material […]
More..
The disintegrator ensures the desired granularity/coarseness of the transported material. It is placed on the drive drum of the belt conveyor.This device is a suitable component in a technological system where there may be cases of the transported material hardening or sticking together. The disintegrator is a part of the belt conveyor and can be […]
More..
The excavator machine is used for reclaiming bulk material from a stockpile by raking the material underneath the machine onto the subsequent conveyor belt. The machine consists of five main parts – chassis, lower structure, upper structure, arm, and operator cabin. The chassis is equipped with four electric motors, each driving one of the machine’s […]
More..
The device is suitable for transporting bulk materials such as coal, slag, biomass, crushed alternative fuels, gypsum, limestone, pellets, gravel, fertilizers, crushed municipal waste, and more. It is used for transporting fine fraction material by rotating a screw spindle along the axis of the conveyor. The conveyor is ideal for transport that requires precise dosing […]
More..
The tripper car allows for the selection of any discharge position for transported material from the belt conveyor. It is mounted on rails along the belt conveyor, and its structure consists of a rigid steel frame. It also includes a locking mechanism that ensures reliable and secure position fixing. An interesting product variation is the […]
More..
The basic technical solution of this conveyor consists in using a chain for transfer of tensile forces and a rubber belt as a carrier of the transported material – the material is carried on the belt.
More..
Drums are used as an independetnt product in assemblies or transport devices, e.g. belt and pipe conveyors, elevators. They are used for driving the conveyor, its tensioning and changing of direction and geometry of its route.
More..
It is a basic type of the conveyor with a wide range of variants and applications. Thanks to the simple construction design and the principle of material transport, the conveyor has a long lifetime and the material can be transported over long distances at high transport capacity.
More..
The basic technical solution of this conveyor consists in using one or more chains for transfer of tensile forces and struts which skid the transported material along the bottom or the raised bottom of the conveyor.
More..
The conveyor is suitable for transport with the need for precise dosing and regulation of the transported amount of material.
More..
This type of conveyor is mainly used in shorter distance technological operations with lower transport capacity requirements.
More..
This device is usually located below the driving station of the belt conveyors and other devices where it is able to clear spillage into the hopper.
More..
Tensioning is used as an independent product in assemblies or transport devices, e.g. belt and pipe conveyors, elevators.
More..
The self-aligning idler provides the stability of the conveyor belt – it regulates possible belt misaligning and the belt is directed back to the center of the roller conveyor.
More..